STEEL BARS
Cold drawn, ground, peeled and hot rolled peeled bars according to standards EN 10277 / EN 10278 (or comparable standards), with various heat treatments (annealed, normalized, quenched and tempered, …).
Offered diameters:
Round bars: 2 – 200 mm
Hexagonal bars: 4 – 100 mm
Square bars: 4 – 100 mm
Flat bars: 5 x 4 mm – 250 x 20 mm mm
Special profiles and shapes (on request)
Bar’s length: L = 2.000 – 8.000 mm (or on request)
Tolerance: h6, h7, h8, h9, h11, k11, k13, g6, g9, f7, …. (or on request)
FREE CUTTING STEEL
| EN steel designation | W.Nr. |
| 11SMn30 | 1.0715 |
| 11SMnPb30 | 1.0718 |
| 11SMn37 | 1.0736 |
| 11SMnPb37 | 1.0737 |
| 11SMnPb30+Te+Bi | 1.0718+Te+Bi |
| 11SMnPb37+Te+Bi | 1.0737+Te+Bi |
| 28SMnPb28 | |
| 10SPb20 | 1.0722 |
| 35S20 | 1.0726 |
| 46S20 | 1.0727 |
| 38SMn28+Te | 1.0760+Te |
| 38SMnPb28+Te | 1.0761+Te |
| 44SMnPb28 | 1.0763 |
| 36SMnPb14 | 1.0765 |
CONSTRUCTION, CARBON AND ALLOY STEEL
| EN steel designation | W.Nr. |
| C10E | 1.1121 |
| C10R | 1.1207 |
| C15E | 1.1141 |
| 16MnCr5 | 1.7131 |
| 16MnCrS5+Pb | 1.7139 |
| 20MnCr5 | 1.7147 |
| 20MnCrS5 | 1.7149 |
| 18CrMoS4 | 1.7244 |
| 16NiCr4 | 1.5714 |
| 16NiCrS4+Pb | 1.5715 |
| 16NiCr11 | |
| 20NiCrMo2-2 | 1.6523 |
| 17NiCrMoS6-4 | 1.6569 |
| C22E | 1.1151 |
| C30R | 1.1179 |
| C35E | 1.1181 |
| C35R+Pb | 1.1180 |
| C40R | 1.1189 |
| C45E | 1.1191 |
| C45R+Pb | 1.1201 |
| C50E | 1.1206 |
| C55E | 1.1203 |
| C55R | 1.1209 |
| 34CrS4 | 1.7037 |
| 41Cr4 | 1.7035 |
| 41CrS4 | 1.7039 |
| 36CrMn5 | |
| 25CrMoS4 | 1.7213 |
| 34CrMoS4 | 1.7226 |
| 42CrMo4 | 1.7225 |
| 42CrMoS4+Pb | 1.7227 |
| 50CrMo4 | 1.7228 |
| 39NiCrMo3+Pb | |
| 36CrNiMo4 | 1.6511 |
| 34CrNiMo6 | 1.6582 |
| S235JRG2 | 1.0038 |
| S355J2G3 | 1.0570 |
| E335+S | 1.0060 |
| E335GC | 1.0543 |
| C4C | 1.0303 |
| C10C | 1.0214 |
Steel according to standards EN 10060 (DIN 7527-6) / EN 10025-2 EN10060 / EN 10084, EN 10060 / EN 10083, EN 10059 / EN 10083, EN 10058 / EN 10083 (or according to comparable standards).
According to assortment of our suppliers we present basic groups of hot rolled and forged steel based on their purpose:
Round hot rolled or forged structural steel according to EN 10060 (DIN 7527-6) / EN 10025-2m
Round hot rolled or forged case hardening steel according to EN 10060 (DIN 7527-6) / EN10084
Round hot rolled or forged steel for quenching and tempering according to EN 10060 (DIN 7527-6) / EN10083-2, 10083-3
Additional options: turned and pre-turned steel surface and various heat treatments (annealed, normalized, quenched and tempered, …).
Offered diameters:
Round bars: 20 – 800 mm
Square bars: 20 – 400 mm
Bar’s length: L = 2.000 – 12.000 mm (or on request)
For square and flat bars there are various options for radius and round-edged corners according to EN 10058, EN 10092 or on request. We offer also hot rolled bars with peeled surface in tolerance H11 or H13. All steel has EU origin.
HOT ROLLED OR FORGED ROUND STEEL FOR STRUCTURES
| EN steel designation | W.Nr. |
| S235JR | 1.0037 |
| S355J0 | 1.0553 |
| S355J2 | 1.0570 |
HOT ROLLED OR FORGED ROUND STEEL FOR CEMENTATION
| EN steel designation | W.Nr. |
| C15E | 1.1141 |
| 16MnCr5 | 1.7131 |
| 20MnCr5 | 1.7147 |
HOT ROLLED OR FORGED ROUND STEEL FOR HEAT - TREATMENT
| EN steel designation | W.Nr. |
| C35E | 1.1181 |
| C45E* | 1.1191 |
| C60E* | 1.1221 |
| 41Cr4* | 1.7035 |
| 42CrMo4* | 1.7225 |
Stainless steel according to standards EN 10060 / EN 10083, EN 10278 / EN100 83, EN 10058 / EN 10088, EN 10278 / EN 10088 (or according to comparable standards) with various heat treatments (annealed, normalized, quenched and tempered, …).
Offered diameters:
Round bars: 3 – 300 mm
Hexagonal bars: 4 – 100 mm
Square bars: 4 – 100 mm
Flat bars: 5 x 4 mm – 250 x 20 mm
Bar’s length: L = 3.000 – 6.000 mm (or on request)
Tolerance: h9, h11, k11, k13, …. (or on request)
STAINLESS STEEL BARS
| EN steel designation | W.Nr. |
| X6Cr17 | 1.4016 |
| X20Cr13 | 1.4021 |
| X30Cr13 | 1.4028 |
| X46Cr13 | 1.4034 |
| X14CrMoS17 | 1.4104 |
| X17CrNi16-2 | 1.4057 |
| X5CrNi18-10 | 1.4301 |
| X2CrNi18-9 | 1.4307 |
| X6CrNiTi18-10 | 1.4541 |
| X8CrNiS18-9 | 1.4305 |
| X5CrNiMo17-12-2- | 1.4401 |
| X6CrNiMoTi17-12-2- | 1.4571 |
| X2CrNiMo17-12-2- | 1.4404 |
| X2CrNiMoN22-5-3 | 1.4462 |
| X15CrNiSi25-21 | 1.4841 |
